PRODUCTS
Customized carbon fiber shaped tubes, customized carbon fiber shaped parts, straight tubes, carbon fiber tubes, carbon fiber sheets and carbon fiber shaped products
Straight Tapered Fish Fork Pipe
Standard |
Metric System, British System |
Outer Diameter mm |
Usually 5-550mm, the larger diameter need to check with engineers. |
Inner Diameter mm |
Usually 5-500mm, the larger diameter need to check with engineers. |
Diameter tolerance |
±0.2mm |
Thickness |
5-25mm, Customized |
Length |
5mm~6.5m |
Surface treatment |
Matte / glossy |
Maximum tolerable temperature |
- 30 - + 180 C |
Appearance of Carbon fiber material |
1K, 3K, 6K, 12K (according to customer requirements) |
Rolling and wrapping |
According to the customer's requirements to set the carbon fiber material layer ratio |
The directions of Rolling and wrapping carbon fiber |
According to the customer's performance requirements for different products, engineers can design the main structure of the product through mechanical performance simulation in the process of structural design to achieve the best performance. |
Water absorption |
0.66﹪ |
Density |
1.78g/cm3 |
Stiffness |
Calculated value after test according to customer requirements |
Bending strength |
Calculated value after test according to customer requirements |
Tensile strength |
T300 T700 T800 T1000 |
The detection and inspection test methods in the production process and after the production |
In the production process, each section uses special testing instruments for dimensional inspection. After the completion of production, the quality control carries out full inspection according to the drawing dimensions |
Recommended Products
CONTACT
TEL:+86-631-5785879
E-mail:sales@whhaoshida.com